1. Service Box Handbook
  2. /
  3. Errors

Octoplus Box errors and fixes: the messages the vendor documents

Most Octoplus Box errors come from smart card update limits, server load, wrong login details, drivers or firmware. Here are the messages the vendor documents, what they mean and the fix for each.

Updated · 6 min read · By Service Box Handbook

This is an independent manual, not the vendor's site. Buttons lead to the official download page on octoplusbox.com. Facts were read on octoplusbox.com on 8 November 2026; the vendor does not publish most prices, so none are guessed here.

The most common Octoplus Box errors are the smart card update limit, which resets at 00:00 UTC+2, a busy server, and a 30 minute IP block after too many wrong logins. Failed unlocks usually come from drivers, cables, unsupported firmware or a damaged security area. The vendor's fixes are below; credit claims must be sent within 7 days with logs.

The number of updates has exceeded the maximum value

Of all Octoplus Box errors, this one worries owners most. To protect the smart card, the box limits how many times the card can be updated. A card updated too often can block itself and stop working for good. The software normally tells you when an update is needed, so never update when it has not asked.

Fix: wait until 00:00 UTC+2, when attempts are added automatically, or ask support by chat or email to allow more attempts.

Service is busy and IP in black list

"Service is busy! Try again later" means the remote server is overloaded or under maintenance. Submit the request again a couple of hours later.

"Could not connect to the server! Your IP is in black list!" means the credits login or password was entered wrongly too many times, so the server blocks your IP for about 30 minutes. Check the account details in your purchase email before trying again; the server credits guide explains how to recover a lost password.

Device not unlocked or codes not found

CaseLikely causeFix
Failed, no credits chargedNew firmware or security version, unsupported device, drivers or cablePost a detailed thread with logs in the vendor's forum section
Failed, credits chargedDamaged or modified security area, driver or connection problem, old or damaged modem firmwareCheck IMEI and SW version, retry with same connection, account and box, check drivers, then contact support
Phone does not accept codesModem firmware too old or damaged after a downgradeReflash stock firmware, do a factory data reset, enter codes again

If the IMEI or software version reads as Unknown, NULL or 000000000, stop. The read itself has failed, and any code calculated from it will be wrong.

Box or phone not detected

Detection problems are almost always caused by drivers or cables. Open Windows Device Manager with the box and the phone connected. If either shows as unknown, install the matching driver from the vendor's Drivers page; the drivers guide lists box, FTDI and phone brand drivers. Use the cable that Cable & Manual names for that model.

If the box itself is not detected after a fresh install, repeat the steps in the activation guide.

How to report a problem

The vendor states that it ignores emails without logs, serial number and account name, and turns down claims older than 7 days. General questions go to the official thread on GSM Forum.

  1. Save the log files from the failed operation.
  2. Note the box serial number and the credits account username.
  3. Send them by email or chat within 7 days of the operation.
  4. For remote unlock claims, add an HD video of the attempt uploaded to YouTube.

Current versions are listed on the download page.

Update to the current tool

Later releases often fix failures on new firmware. Check the latest version on the official page.

Go to the official download page

Frequently asked questions

How do I fix the updates exceeded maximum error?

Wait until 00:00 UTC+2, when update attempts are added automatically, or ask support by chat or email to allow more. Only update the smart card when the software asks for it.

What does Your IP is in black list mean?

The credits login or password was entered wrongly too many times, so the server blocked your IP for about 30 minutes. Check the details from your purchase email and try again after the block ends.

Why does the phone not accept the unlock code?

The vendor says the usual cause is old or damaged modem firmware, often after a downgrade. Reflash stock firmware, do a factory data reset and enter the code again; if it still fails, contact support with logs.

Will I get credits back after a failed unlock?

Possibly, if you report it within 7 days with logs, box serial and account name, and you followed the manual. Credits are not returned if you ignored the instructions or entered the wrong model for a remote unlock.

Where do I get help if my error is not listed?

Contact the vendor's support by chat or email, or use its official thread on GSM Forum. Include logs and serial numbers, or the request may be ignored.

Sources